Firewall Configuration

How to setup firewall in Linux?

What is a Firewall?
Firewall is a network security system that filters and controls the traffic on a predetermined set of rules. This is an intermediary system between the device and the internet.

NOTE:- If you already know about the working of Firewall in Linux and just want to know the Commands, then please go the end of the tutorial.

Note:- Know more about Firewall.

Chains :-

Chains are a set of rules defined for a particular task.

We have three chains(set of rules) which are used to process the traffic:-

  1. INPUT Chains
  2. OUTPUT Chains
  3. FORWARD Chains

1. INPUT Chains
Any traffic coming from the internet(network) towards your local machine has to go through the input chains. That means they have to go through all the rules that have been set up in the Input chain.

2. OUTPUT Chains
Any traffic going from your local machine to the internet needs to go through the output chains.

3. FORWARD Chain
Any traffic which is coming from the external network and going to another network needs to go through the forward chain. It is used when two or more computers are connected and we want to send data between them.

Different Policies :-

There are three actions which the iptables can perform on the traffic

  2. DROP

When traffic passes the rules in its specified chain, then the iptable accepts the traffic.
That means it opens up the gate and allows the person to go inside the kingdom of Thanos.

When the traffic is unable to pass the rules in its specified chain, the iptable blocks that traffic.
That means the firewall is closed.

This type of action is similar to the drop action but it sends a message to the sender of the traffic stating that the data transfer has failed.
As a general rule, use REJECT when you want the other end to know the port is unreachable’ use DROP for connections to hosts you don’t want people to see.

You need to keep in mind a simple rule here:-
The Rules you set in the iptables are checked from the topmost rules to the bottom. Whenever a packet passes any of the top rules, it is allowed to pass the firewall. The lower rules are not checked. So be careful while setting up rules.

Basic iptables commands :

1. List the current rules of iptable :

To list the rules of the current iptables:-

sudo iptables -L

The Output would be:-

As you can see, we have three chains (INPUT, FORWARD, OUTPUT). We can also see column headers, but they are no actual rules. This is because most of the Linux come with no predefined rules.

Let see what each column mean.

This defines what action needs to be done on the packet (ACCEPT,DROP,etc..)

This defines the protocol (TCP,IP) of the packet.

This tells the source address of the packet.

This defines the destination address of the packet

2. Clear the rules :

If you ever want to clear/flush out all the existing rules. Run the following command:-

sudo iptables -F

This will reset the iptables.

3. Changing the default policy of chains :

sudo iptables -P Chain_name Action_to_be_taken

As you can see in the above picture, the default policy of each of the chain is ACCEPT.

For eg:
If you see the forward chain, you will see “Chain FORWARD (policy ACCEPT)”.This means your computer allows any traffic to be forwarded to another computer.

In order to change the policy of forwarding to drop:-

sudo iptables -P FORWARD DROP

The above command will stop any traffic to be forwarded through your system. That means no other system can your system as an intermediary to pass the data.

Making your First Rule :

1. Implementing a DROP rule :

We’ll now start building our firewall policies.We’ll first work on the input chain since that is where the incoming traffic will be sent through.


sudo iptables -A/-I chain_name -s source_ip -j action_to_take

We’ll take an example to understand the topic.

Let’s assume we want to block the traffic coming from an IP address The following command can be used:-

sudo iptables -A INPUT -s -j DROP

This may look complicated, but most of it will make sense when we go over the components:-

The flag -A is used to append a rule to the end of a chain. This part of the command tells the iptable that we want to add a rule to the end of the INPUT chain.

In this flag the rules are added to the top of the chain.

The flag -s is used to specify the source of the packet. This tells the iptable to look for the packets coming from the source

This specifies what the iptable should do with the packet.

In short, the above command adds a rule to the INPUT chain which says, if any packet arrives whose source address is then drop that packet, that means do not allow the packet reach the computer.

Once you execute the above command you can see the changes by using the command:-

sudo iptables -L

The Output would be:-

2. Implementing a ACCEPT rule :

If you want to add rules to specific ports of your network,then the following commands can be used.


sudo iptables -A/-I chain_name -s source_ip -p protocol_name --dport port_number -j Action_to_take

-p protocol_name:-
This option is used to match the packets that follow the protocol protocol_name.

-dport port_number:
This is option is available only if you give the -p protocol_name option. It specifies to look for the packets that are going to the port “port_number”.

Let’s say we want to keep our SSH port open (we will assume in this guide that the default SSH port is 22) from the network we blocked in the above case. That is we only want to allow those packets coming from and which wants to go to the port 22.

What do we do:-
Let’s try the below command:-

sudo iptables -A INPUT -s -p tcp --dport 22 -j ACCEPT

The above command says looks for the packets originating from the IP address, having a TCP protocol and who wants to deliver something at the port 22 of my computer. If you find those packets then Accept them.

The Output for the command is:-

But, There is a problem with the above command. It actually does not allow the packets. Can You Guess What it is?
HINT:- It is related to the way the rules are accessed.

Remember as we discussed earlier, The Rules you set in the iptables are checked from the top to the bottom. Whenever a packet is processed to one of the top rules, it is not checked with the lower rules.

Okay! Here’s The Answer:-
In our case, The packet was checked with the topmost rule, which says that the iptable must drop any packet coming from Hence once the packet got accessed through this rule, it did not go to the next rule which allowed packets to the port 22. Therefore it failed.

What could be done?
The easiest answer is, Add the rule to the top of the chain. All you need to do is change the -A option to -I option. ( In our scenario we first delete the rule [refer the next section] added in the above section and then add the below rule again )

The command to do that is:-

sudo iptables -I INPUT -s -p tcp --dport 22 -j ACCEPT

Now check the iptable configuration using -L command. The output would be:-

Therefore, any packet coming from is first checked if it is going to the port 22 if it isn’t then it
is run through the next rule in the chain. Else it is allowed to pass the firewall.

Now that you have understood how to block and accept the incoming traffic let’s see how to delete rules:-

3. Deleting a rule from the iptable :


sudo iptables -D chain_name rule_number

If we want to delete the rule which accepts the traffic to port 22 and which we have added in the previous section, then:-

sudo iptables -D INPUT 1

Remember the rule number starts from 1
The Output :-

4. Saving your configuration :

This part is unnecessary if you are implementing it on a personal computer which is not a server, but if
you are implementing a firewall on a server, then there are high chances that your server might get corrupted and
you might lose all your data. So, it’s always better to save your configurations.

There are a lot of ways to do this, but the easiest way I find is with iptables-persistent package. You can download the package from Ubuntu’s default repositories:

sudo apt-get update
sudo apt-get install iptables-persistent

Once the installation is complete, you can save your configuration using the command:-

sudo invoke-rc.d iptables-persistent save

Well, this is the end of the tutorial.
Let’s just brief up all the commands we have learned so far:-

Summary :

1. List the current rules of iptables:

sudo iptables -L

2. To change the default policy:

sudo iptables -P Chain_name Action_to_be_taken


sudo iptables -P FORWARD DROP

3. To clear/flush all the rules

sudo iptables -F

4. To append a rule at the end of the chain:

sudo iptables -A

5. To append a rule at the start of the chain:

sudo iptables -I

6. To implement a ACCEPT rule:-

sudo iptables -A/-I chain_name -s source_ip -j action_to_take


iptables -A INPUT -s -j ACCEPT

7. To implement a DROP rule:-

sudo iptables -A/-I chain_name -s source_ip -j action_to_take


iptables -A INPUT -s -j DROP

8. Implementing rules on specific ports/protocols:-

sudo iptables -A/-I chain_name -s source_ip -p protocol_name --dport port_number -j Action_to_take


sudo iptables -I INPUT -s -p tcp --dport 22 -j ACCEPT

9. To delete a rule:-

sudo iptables -D chain_name rule_number


sudo iptables -D INPUT 1

10. To save the configuration:-

sudo invoke-rc.d iptables-persistent save

And that’s the end of the tutorial. We have seen all the necessary commands that you need to implement a firewall on your local machine. There are various other actions we can make our firewall do, but it is impossible to cover all of those in a single article. So, I will be writing a few more articles explaining all the commands. Until then, Keep experimenting!!

Hope this article helpful for you. Thank You

If You Appreciate What We Do Here On Hackonology, You Should Consider:

Hackonology is the fastest growing and most trusted community site where you can find lots of courses, articles about Technology/Hacking/Cracking. Millions of people visit Hackonology! to search or browse the thousands of published articles available FREELY to all.

Let's be a part of Hacker's Community! Join our Hacking Team

We Are Indian We Are Great

Leave a Comment

Your email address will not be published. Required fields are marked *